Mini LED Bulbs in G4, G9, E14, and B15 for Compact Fittings

Small fittings deserve the same quality of light as large ones. Dulora's mini globe range covers G4 globe, G9 globe, E14, and B15 bases, bringing CRI 90 to 95+, rendering warm tones and fine detail with an accuracy that standard CRI 80 globes cannot match, and dimmable performance to the lamps, chandeliers, and decorative fittings that standard globes cannot reach.

Low-voltage mini globes in G4 (12V and 24V) are available for wet area bathroom zones, caravans, and low-voltage architectural installations under AS/NZS 3000. G9 models cover the mains-voltage small bi-pin fittings found in designer pendants, wall lights, and modern decorative fittings across New Zealand homes. E14 and B15 cover the small Edison screw and small bayonet cap fittings in bedside lamps, compact chandeliers, and decorative pendants.

For dedicated G4 and G9 product pages with the full voltage and specification range, see G4 Globes and G9 Globes. For dedicated E14 and B15 browsing, see E14 Globes.

AS/NZS certified, three-year warranty, 2,200+ verified reviews. Trusted across Aotearoa since 2010.

Mini Globes: Small Scale, No Compromise on Quality

What bases are covered in the Dulora mini globe range?

The Dulora mini globe range covers four base types: E14 small Edison screw, B15 small bayonet cap, G9 bi-pin mains voltage, and G4 bi-pin low voltage (12V and 24V). Each serves different fitting applications from bedside lamps and chandeliers through to vanity lights, under-cabinet systems, and wet area bathroom installations.

E14 is the small Edison screw at 14mm, found in compact chandeliers, bedside lamps, and decorative pendants. B15 is the small bayonet at 15mm, the smaller version of the standard B22, found in compact fittings where a standard B22 would be proportionally oversized. G9 is the small mains-voltage bi-pin used in modern designer wall lights, pendants, and decorative fittings. G4 is the low-voltage bi-pin (12V or 24V) used in under-cabinet lighting, caravan fittings, and wet area bathroom installations.

Which mini globes are suitable for bathroom wet areas?

G4 low-voltage globes (12V DC) are the correct choice for bathroom wet area zones that require low-voltage installations under AS/NZS 3000. The 12V DC specification keeps the system voltage within the safe low-voltage range for defined wet zones, and the low physical profile of a G4 globe suits the recessed downlight fittings commonly used in wet area ceiling installations.

Any wet area installation should be assessed and fitted by a registered electrician, who will confirm the zone classification and the correct IP rating for the fitting. Standard 240V G9 or E14 globes are not appropriate for defined wet area zones regardless of their IP rating.

Do G9 globes need a special dimmer?

G9 mains-voltage LED globes require a trailing-edge LED dimmer for smooth performance. Standard rotary dimmers designed for incandescent or halogen loads often cause buzzing, flickering, or minimum-load issues with LED G9 globes because the load is lower than the dimmer expects.

Dulora's dimmable G9 globes are tested and confirmed compatible with the DimEzy range LED Light Dimmers. If you have an existing dimmer that is causing issues, check whether it is trailing-edge rated: most modern LED-compatible dimmers are, but older installations frequently are not.

Atmosphere, Illuminated.

Frequently Asked Questions: Mini Globes

• What bases are covered in the Dulora mini globe range?
• The range covers E14 small Edison screw, B15 small bayonet cap, G9 mains-voltage bi-pin, and G4 low-voltage bi-pin (12V and 24V). Each serves different fitting applications from bedside lamps and chandeliers to designer pendants, vanity lights, and wet area bathroom installations.
• What CRI rating do Dulora mini globes have?
• Dulora mini globes are built to CRI 90 to 95+ across the range. At this level, warm tones and fine detail appear natural and accurate, a visible improvement compared to standard CRI 80 globes.
• Are Dulora G4 globes suitable for New Zealand wet area bathroom zones?
• Dulora G4 12V DC globes are suitable for low-voltage wet area installations compliant with AS/NZS 3000. Any wet area installation should be carried out by a registered electrician who will confirm zone classification and fitting IP rating requirements.
• Are Dulora mini globes certified for New Zealand?
• Yes. All Dulora mini globes carry AS/NZS certification for New Zealand mains voltage (240V for E14, B15, G9; and 12V/24V for G4) and are covered by a three-year product warranty.