G9 Globes, the Capsule That Replaced Halogen in Modern Fittings

The G9 bi-pin globe is found in some of the most design-conscious fittings in New Zealand homes: the kitchen island pendant, the bathroom mirror light, the statement wall sconce. These fittings were originally designed around halogen G9 capsules, and Dulora's G9 globe range provides a direct LED replacement that matches the compact capsule dimensions while delivering significantly better performance on every measure that matters.

CRI 90+ across the range, rendering warm tones and colour accurately in the compact form that G9 fittings demand. All dimmable G9 models work smoothly with the DimEzy range LED Light Dimmers from 1 to 100 per cent, and the transition from halogen to LED G9 is a direct physical swap in most fittings without any rewiring.

For low-voltage G9 applications, Dulora also offers 12V DC G9 globes for specialist and wet area installations. For the full mini globe range across all compact bases, see Mini Globes. For bathroom fitting applications, see Bathroom Lighting.

AS/NZS certified, three-year warranty, 2,200+ verified reviews across the range. Trusted across Aotearoa since 2010.

G9 Globes: The LED Capsule That Replaced Halogen Without Compromise

Are G9 LED globes a direct replacement for halogen G9 capsules?

Yes. Dulora G9 LED globes are designed to the same dimensional specifications as halogen G9 capsules and fit directly into existing G9 fittings without any modification. They run cooler, consume substantially less energy, and last significantly longer than the halogen globes they replace.

The one consideration is the dimmer. Many G9 fittings were installed with leading-edge dimmers designed for the higher wattage of halogen capsules. LED G9 globes draw much less power, which can cause minimum-load issues on older dimmers. If the globe flickers or does not dim smoothly after installation, the dimmer is almost always the cause. The DimEzy range LED Light Dimmers is confirmed compatible.

Why do G9 LED globes sometimes flicker on existing dimmers?

The most common cause of flickering with G9 LED globes is a dimmer that was specified for halogen loads. Halogen G9 capsules drew 20W to 50W per fitting; LED G9 replacements draw 2W to 5W. Many older dimmers have a minimum load threshold of 25W or higher, and a single LED G9 at 3W falls well below it.

The fix is clear: replace the dimmer with a trailing-edge LED-rated model designed for low-wattage LED loads. Dulora's DimEzy range is designed for exactly this scenario and is confirmed compatible with the full G9 range. If replacing the dimmer is not practical, check that the total LED load across all fittings on the circuit meets or exceeds the dimmer's stated minimum.

Where are G9 fittings most commonly found in New Zealand homes?

G9 fittings appear most frequently in three locations. Kitchen pendants and island lights are the most common: many modern kitchen pendant designs use G9 bases for their compact form. Bathroom vanity and mirror lights are the second major application, where the small capsule format suits vanity bar and wall-mounted mirror fittings. Wall sconces and decorative feature lights are the third, particularly in contemporary designs where the fitting is slim and the globe needs to be compact.

In all three cases, the G9 globe is typically visible or semi-visible, which makes CRI and colour temperature particularly important. A G9 in a frosted kitchen pendant is seen every time you stand at the bench; a G9 in a bathroom vanity is seen at close range every morning.

Atmosphere, Illuminated.

Frequently Asked Questions: G9 Globes

• Are G9 LED globes a direct replacement for halogen G9 capsules?
• Yes. Dulora G9 LED globes match the dimensional specifications of halogen G9 capsules and fit directly into existing G9 fittings without modification. They run cooler, use less energy, and last significantly longer.
• What CRI rating do Dulora G9 globes have?
• Dulora G9 globes are built to CRI 90+ across the range, rendering warm tones and colour accurately in the compact form that G9 fittings demand.
• Will G9 LED globes work with my existing dimmer?
• Dulora G9 LED globes work with trailing-edge LED dimmers including the DimEzy range. Older leading-edge dimmers designed for halogen loads may cause flickering due to minimum-load issues. If flickering occurs after installation, replacing the dimmer with a trailing-edge LED model is the recommended fix. See 
• Are Dulora G9 globes certified for New Zealand?
• Yes. All Dulora G9 globes carry AS/NZS certification for New Zealand mains voltage and are covered by a three-year product warranty.