DimEzy Knob LED Dimmer - White Knob is backordered and will ship as soon as it is back in stock.
Simple, smooth dimming for LED lighting
The DimEzy Knob LED Dimmer is a straightforward turn-to-dim control for 240V dimmable LED and halogen lighting. It handles dimming only, with on/off done by a separate switch. That suits a plate where the dimmer sits beside an existing light switch.
It uses trailing-edge phase control, the dimming type recommended for LED, for smooth and quiet dimming on compatible dimmable globes. It’s also immune to the ripple control signals sent over the mains supply, a common cause of flicker in dimmed lights. It retrofits into Clipsal Classic and similar 84mm-centre plates, and up to six mechanisms fit in one plate.
Best for: replacing an old dimmer where a switch is already on the plate, or a simple, cost-effective dimming setup.
Technical specifications
| Specification | Details |
|---|---|
| Control | Rotary knob, dimming only (separate switch required for on/off) |
| Dimming technique | Trailing-edge phase control |
| Voltage | 220 to 240V AC, 50Hz |
| Dimmable LED load | 5 to 150W |
| Incandescent and 240V halogen load | 10 to 400W |
| Also suits | Low-voltage halogen with dimmable electronic transformers |
| Maximum load | 400VA single gang (derate for multi-gang plates) |
| Wiring | Two-wire, not polarity sensitive |
| Switching | One-way, or two-way with a two-way switch |
| Mounting | 84mm Australian pattern plates, Clipsal Classic and similar, wall or architrave |
| Protection | Soft start, over-current, over-temperature and short circuit |
| Mains ripple immunity | Yes |
| Standards | AS/NZS 3100, AS/NZS 3133, IEC 60669-2-1, AS/NZS CISPR 15 |
| Colours | White or black knob |
| Use | Indoor use only |
| Warranty | 36 months |
Good to know
Which DimEzy dimmer is right for you?
All DimEzy wall dimmers suit 240V dimmable LED and halogen lighting and retrofit into your existing wall plate. Choose by how you want to control your lights and which plate you have.
| Model | How it works | On/off | Control from more than one spot | Plates |
|---|---|---|---|---|
| Knob | Turn to dim | Separate switch needed | Two-way switching | Clipsal Classic and similar |
| Rotary | Turn to dim, push for on/off | Built in | Two-way switching | Clipsal Classic and similar |
| Push Button | Short press on/off, hold to dim | Built in | Two-way switching | Clipsal Classic and similar |
| Universal Push Button | Short press on/off, hold to dim | Built in | Dim and switch from up to 20 locations | Clipsal Iconic |
The Knob, Rotary and Push Button are trailing-edge dimmers. The Universal detects trailing or leading edge automatically, so it also handles iron-core transformers and small motor loads.
LED brightness is measured in lumens, not watts. Here's a quick conversion guide:
All Dulora product pages list wattage and lumen output so you can choose the perfect brightness for your needs.
Dulora bulbs are designed for over 25,000 hours of use. If you use your light for an average of 3 hours per day, your LED bulb could last over 22 years. This exceptional longevity significantly reduces the frequency of replacements compared to traditional incandescent bulbs, which typically last only 1,000-2,000 hours. Note that all LED bulbs' light output gradually decreases over time, a phenomenon known as lumen depreciation.
Yes, most Dulora bulbs are dimmable, allowing you to create the perfect ambiance for any occasion. Look for the "dimmable" specification on the product page. For optimal performance, we recommend using LED-compatible dimmers. Some older dimmer switches may cause flickering or buzzing with LED bulbs. If you experience any issues, please contact our customer support team for assistance.
Colour temperature refers to the warmth or coolness of light, measured in Kelvins (K):
Choose based on the mood you want to create and the purpose of the space.
Still have a question?
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Select Colour
