DimEzy Universal Push Button LED Dimmer is backordered and will ship as soon as it is back in stock.
Made for Clipsal Iconic, with dimming from any room entry
The DimEzy Universal Push Button LED Dimmer is our most capable wall dimmer, made to fit Clipsal Iconic plates for a clean, modern finish. A short press switches your lights on or off, and holding the button raises or lowers the brightness.
What sets it apart is multi-way control. Pair it with up to 20 push or retractive switches and you can dim and switch the same lights from every doorway, hallway end or stair landing. A small LED backlight shows the dimmer status.
It detects the right dimming mode automatically: trailing edge for LED and most halogen loads, and leading edge where iron-core transformers or small motor loads need it. An adjustable minimum brightness setting helps stop some LED globes flickering or dropping out at the low end.
Best for: Iconic homes, open-plan spaces, hallways and stairwells where you want to dim from more than one spot, and fit-outs with mixed lighting loads.
Technical specifications
| Specification | Details |
|---|---|
| Control | Push button (short press on/off, hold to dim), LED status backlight |
| Multi-way | Dims and switches from up to 20 push or retractive slave switches |
| Dimming technique | Automatic trailing or leading edge (can be set manually) |
| Minimum brightness | Adjustable |
| Voltage | 230 to 240V AC, 50Hz |
| Minimum load | 3W |
| Maximum load | 300W single gang; 250W per dimmer two-gang; 200W per dimmer three-gang |
| Trailing-edge loads | Integral dimmable LED globes, dimmable LED with compatible electronic transformers, incandescent, MV halogen, LV halogen with electronic transformers |
| Leading-edge loads (manual mode) | Iron-core transformers up to 50W, small motor loads such as ceiling sweep fans up to 50W |
| Protection | Soft start, resettable thermal cut-out, short-circuit protection with auto restart |
| Overload protection | Requires a 250V 6A Type C MCB (IEC 60898-1) |
| Mounting | Clipsal Iconic |
| Operating range | 0 to 45°C, 10 to 90% RH, indoor use only |
| Standards | AS/NZS 60669-2-1 |
| Warranty | 36 months |
Good to know
Which DimEzy dimmer is right for you?
All DimEzy wall dimmers suit 240V dimmable LED and halogen lighting and retrofit into your existing wall plate. Choose by how you want to control your lights and which plate you have.
| Model | How it works | On/off | Control from more than one spot | Plates |
|---|---|---|---|---|
| Knob | Turn to dim | Separate switch needed | Two-way switching | Clipsal Classic and similar |
| Rotary | Turn to dim, push for on/off | Built in | Two-way switching | Clipsal Classic and similar |
| Push Button | Short press on/off, hold to dim | Built in | Two-way switching | Clipsal Classic and similar |
| Universal Push Button | Short press on/off, hold to dim | Built in | Dim and switch from up to 20 locations | Clipsal Iconic |
The Knob, Rotary and Push Button are trailing-edge dimmers. The Universal detects trailing or leading edge automatically, so it also handles iron-core transformers and small motor loads.
LED brightness is measured in lumens, not watts. Here's a quick conversion guide:
All Dulora product pages list wattage and lumen output so you can choose the perfect brightness for your needs.
Dulora bulbs are designed for over 25,000 hours of use. If you use your light for an average of 3 hours per day, your LED bulb could last over 22 years. This exceptional longevity significantly reduces the frequency of replacements compared to traditional incandescent bulbs, which typically last only 1,000-2,000 hours. Note that all LED bulbs' light output gradually decreases over time, a phenomenon known as lumen depreciation.
Yes, most Dulora bulbs are dimmable, allowing you to create the perfect ambiance for any occasion. Look for the "dimmable" specification on the product page. For optimal performance, we recommend using LED-compatible dimmers. Some older dimmer switches may cause flickering or buzzing with LED bulbs. If you experience any issues, please contact our customer support team for assistance.
Colour temperature refers to the warmth or coolness of light, measured in Kelvins (K):
Choose based on the mood you want to create and the purpose of the space.
Still have a question?
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
