DimEzy Rotary LED Dimmer is backordered and will ship as soon as it is back in stock.
Turn to dim, push to switch
The DimEzy Rotary LED Dimmer puts dimming and on/off in one knob. You push to switch your lights on or off and turn to set the brightness, with no separate switch needed.
It uses trailing-edge phase control for smooth, quiet dimming of 240V dimmable LED and halogen lighting, and it’s immune to the ripple control signals sent over the mains supply. An adjustable minimum brightness setting helps stop some LED globes flickering or cutting out at the low end. It retrofits into Clipsal Classic and similar 84mm-centre plates, and up to six mechanisms fit in one plate.
Best for: anyone who prefers a dial and wants switching and dimming in a single control.
Technical specifications
| Specification | Details |
|---|---|
| Control | Rotary knob with push on/off (clockwise to brighten, anticlockwise to dim) |
| Minimum brightness | Adjustable |
| Dimming technique | Trailing-edge phase control |
| Voltage | 220 to 240V AC, 50Hz |
| Dimmable LED load | 5 to 150W |
| Incandescent and 240V halogen load | 10 to 400W |
| Also suits | Low-voltage halogen with dimmable electronic transformers |
| Maximum load | 400VA single gang (derate for multi-gang plates) |
| Wiring | Two-wire, not polarity sensitive |
| Switching | One-way, or two-way with a two-way switch |
| Mounting | 84mm Australian pattern plates, Clipsal Classic and similar, wall or architrave |
| Protection | Soft start, over-current, over-temperature and short circuit |
| Mains ripple immunity | Yes |
| Standards | AS/NZS 3100, AS/NZS 3133, IEC 60669-2-1, AS/NZS CISPR 15 |
| Use | Indoor use only |
| Warranty | 36 months |
Good to know
Which DimEzy dimmer is right for you?
All DimEzy wall dimmers suit 240V dimmable LED and halogen lighting and retrofit into your existing wall plate. Choose by how you want to control your lights and which plate you have.
| Model | How it works | On/off | Control from more than one spot | Plates |
|---|---|---|---|---|
| Knob | Turn to dim | Separate switch needed | Two-way switching | Clipsal Classic and similar |
| Rotary | Turn to dim, push for on/off | Built in | Two-way switching | Clipsal Classic and similar |
| Push Button | Short press on/off, hold to dim | Built in | Two-way switching | Clipsal Classic and similar |
| Universal Push Button | Short press on/off, hold to dim | Built in | Dim and switch from up to 20 locations | Clipsal Iconic |
The Knob, Rotary and Push Button are trailing-edge dimmers. The Universal detects trailing or leading edge automatically, so it also handles iron-core transformers and small motor loads.
LED brightness is measured in lumens, not watts. Here's a quick conversion guide:
All Dulora product pages list wattage and lumen output so you can choose the perfect brightness for your needs.
Dulora bulbs are designed for over 25,000 hours of use. If you use your light for an average of 3 hours per day, your LED bulb could last over 22 years. This exceptional longevity significantly reduces the frequency of replacements compared to traditional incandescent bulbs, which typically last only 1,000-2,000 hours. Note that all LED bulbs' light output gradually decreases over time, a phenomenon known as lumen depreciation.
Yes, most Dulora bulbs are dimmable, allowing you to create the perfect ambiance for any occasion. Look for the "dimmable" specification on the product page. For optimal performance, we recommend using LED-compatible dimmers. Some older dimmer switches may cause flickering or buzzing with LED bulbs. If you experience any issues, please contact our customer support team for assistance.
Colour temperature refers to the warmth or coolness of light, measured in Kelvins (K):
Choose based on the mood you want to create and the purpose of the space.
Still have a question?
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
